News
Training
Links
Half Racks
Combo Half Racks - $1200
Single Half Racks - $725
Specs:
- 1" hole spacing
- Sumo-base for wide stance squatting &
. deadlifting
- Safety catches secured in place by high
strength 7/16" pins that lock in place
- Band pegs with 1" hole spacing
- 7' 6" tall, 24" deep, constructed from 2.5" x 2.5"
11 gauge square tubing
- Fully adjustable pull-up/chin-up handles
- Industrial Air Brush Painted Finish
Information regarding the strength of the
3/8" rod used for J-hooks & safety pins:
Our new J-hooks are now made using Grade 5 3/8
inch bolts without the threads. Although these
appear small to the common consumer, the
breaking strength of these bolts is about 9000 lbs as
noted here:
http://dodgeram.org/tech/specs/bolts/SAE_bolt_stren
gth.html
The safety rods are also made of 3/8" material, but
they are made from high tensile strength rod, which
has been heat treated to increase the strength close
to that of Grade 8 bolts ~ 1200 lbs. The new pipe
system which goes around the rod, is made from a
smaller pipe welded inside a larger 2" pipe, making
them stronger & easier to line up the rods from one
side to the other. This puts all the stress on the pipe
and only stresses the 3/8 rod at the ends, which
virtually eliminates any possible bending.
Combo Half Rack - Power Rack - $1500
Combo Half Racks
Pull-up / Chin-up handles offer the widest variety of
adjustment settings on the market. They can be put to
rotate in any direction & set at a wide variety of widths.
Safety arms are locked in place by a 7/16" pin that twists down so that it can't back out of the
hole. The pins are also welded to short chains so that they will not get lost from the safety arms.
